Clover the....Clover....(Leafling)
Clover, the evenlittlerfoot (thanks Jay), is the third leafling to add to our every growing garden of dolls!
A tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 18pieces.
Clover is a tiny little pocket friend standing at only 9.5cm and is ready to ship with no production wait at all! We ask for a few days to prepare them for shipping though!
You may remember that Clover was the one that started off our entire Bee Muncher madness. We’ve revisited our old (grumpy) friend and made a baby version. Original clover was not available on the faceplate system but now is in their littler teenier form and yes, they’ll still eat all your bees.
This little kit has one BIG attitude. You have been warned.
Clover comes with a (now) magnetic fully articulated tail (that they can balance on if you get your stringing tension down right) and magnetic ears.
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
Clover, the evenlittlerfoot (thanks Jay), is the third leafling to add to our every growing garden of dolls!
A tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 18pieces.
Clover is a tiny little pocket friend standing at only 9.5cm and is ready to ship with no production wait at all! We ask for a few days to prepare them for shipping though!
You may remember that Clover was the one that started off our entire Bee Muncher madness. We’ve revisited our old (grumpy) friend and made a baby version. Original clover was not available on the faceplate system but now is in their littler teenier form and yes, they’ll still eat all your bees.
This little kit has one BIG attitude. You have been warned.
Clover comes with a (now) magnetic fully articulated tail (that they can balance on if you get your stringing tension down right) and magnetic ears.
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
Clover, the evenlittlerfoot (thanks Jay), is the third leafling to add to our every growing garden of dolls!
A tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 18pieces.
Clover is a tiny little pocket friend standing at only 9.5cm and is ready to ship with no production wait at all! We ask for a few days to prepare them for shipping though!
You may remember that Clover was the one that started off our entire Bee Muncher madness. We’ve revisited our old (grumpy) friend and made a baby version. Original clover was not available on the faceplate system but now is in their littler teenier form and yes, they’ll still eat all your bees.
This little kit has one BIG attitude. You have been warned.
Clover comes with a (now) magnetic fully articulated tail (that they can balance on if you get your stringing tension down right) and magnetic ears.
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
PLEASE WEAR A MASK.
Invest in a good one. Your health is so important.
Supply List;
Scissors
1.5mm crochet hook is incredibly useful but not necessary.
Lower grit sandpaper (600+ if sanding by hand) or a dremel with abrasive ‘fuzzy’ attachment.
High Grit sandpaper (1500+) for finishing
UV Cut spray.
Includes;
Clover Head
Human Leafling body
2 Pairs of hands
1 pair of Transparent Clover Ears
1 Fully articulated Clover tail (magnetic)
This kit will be sent with all elastic and magnets required to put them together. We use a tension bar system in the neck so no S-hook is included.
If you need to grab any extra magnets or elastic in future:
Clover faceplate 3x1mm magnets x4
Ears 4x2mm magnets x2 + x2 3x1mm magnets
Elastic 0.5mm
Do not forget to spray the entire doll with UV cut spray after sealing! This will protect her resin!
Below is a stringing guide! Its a bit outdated now but it should give you all the info that you need!
